TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 97 of 830
TM 9-2320-209-20-3-1
(c) Adapter fitting
NOTE
Adapter fitting at primary fuel filter on trucks
with LD– 465 engine is used for this typical
procedure.
1.
Using 7/8-inch open end wrench, hold adapter fitting ( 1). Using 3/4-inch
combination box and open end box wrench, unscrew and take off tube nut
(2) with tube (3).
2.
Using 7/8-inch open end wrench, unscrew and take off adapter fitting ( 1).
END OF TASK
TA 087076
4-15
Back to Top
