TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 87 of 830
TM 9-2320-209-20-3-1
Soldier A 1.
Reaching up behind instrument panel (1) and using 9/16-inch
wrench, hold air cleaner mounting nut (2) in place on bracket
(3) . Tell soldier B when ready.
Soldier B 2.
Using 9/16-inch wrench, screw in and tighten four air cleaner
mounting bolts (4) .
3.
Put tube assembly (5) on air cleaner head (6). Using flat-tip
screwdriver, tighten clamp screw (7) .
4.
Using 7/16-inch wrench, screw in and tighten connector and
filter (8) into hole in air cleaner head (6).
5.
Using 9/16-inch wrench,
screw in and tighten coupling nut (7)
into connector and filter assembly (8) .
NOTE
Follow-on Maintenance Action Required:
1.
Replace air filter element.
Refer to TM 9-2320-209-10.
2.
Close hood and left side panel. Refer to
TM 9-2320-209-10.
END OF TASK
4-5
Back to Top
