TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 81 of 830

TM 9-2320-209-20-3-1
e.
Adjustment.
FRAME 1
1.
2.
3.
4.
5.
6.
7.
NOTE
Refer to para 3-3d of clutch control and linkages replace-
ment procedure to check free pedal travel.
Using 3/4-inch wrenches,
hold clevis (1) and loosen nut (2) .
Pull pin (3) to one side of clevis (1).
Pull clevis away from throwout shaft
lever ( 4).
If free pedal travel is less than 1 1/2 inches, shorten length of rod (5) by
screwing clevis ( 1) into rod.
If free pedal travel is more than 2 inches, make length of rod (5) longer by
unscrewing clevis ( 1).
After setting length of rod (5) , join clevis (1) to throwout shaft lever (4) .
Using prybar, pry pin (3) (from transmission side) through clevis until pin
is seated.
Recheck free pedal travel.
If free pedal travel is 1 1/2 to 2 inches, using 3/4-inch wrench, tighten
nut (2) against clevis (1) .
END OF TASK
TA 04726 6
3-15/(3-16 blank)


Back to Top