TM 9-2320-209-20-3-1
FRAME 8
1.
Using chalk, put mark on clutch pedal shaft (1) where shaft meets floor ( 2).
2.
Using hand, push clutch pedal (3) down until resistance is felt. While still
holding down pedal, put another chalk mark on pedal shaft (1) where shaft
meets floor (2) .
3.
Let go of pedal (3) and measure distance between two marks (4) using a
6-inch ruler. Distance (free pedal travel) should be 1 1/2 to 2 inches.
4.
If free pedal travel is not 1 1/2 to 2 inches,
do clutch adjustment procedure.
Refer to para 3-3e.
NOTE
Follow-on Maintenance Action Required:
1.
Tell direct support maintenance to put- power
takeoff on transmission.
2.
Fill transmission with fluid. Refer to
LO 9-2320-209-12/1.
3.
Put on accelerator linkage. Refer to para 4-29.
END OF TASK
3-14