TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 79 of 830

TM 9-2320-209-20-3-1
1.
From underneath truck, put rubber bumper (1) on pedal shaft (2).
2.
Put pedal
NOTE
Pedal shaft (2) has height adjustment notches. Set pedal
shaft so bolt (3) will be in same notch it was in before
taking out pedal.
shaft (2) through hole in pedal lever (4). Set to right notch and
screw in bolt (3). Using 9/16-inch wrench, tighten bolt.
GO TO FRAME 8
TA 047264
3-13


Back to Top