TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 83 of 830
TM 9-2320-209-20-3-1
CHAPTER 4
FUEL SYSTEM GROUP MAINTENANCE
Section I. SCOPE
4-1. EQUIPMENT ITEMS COVERED .
This chapter gives equipment maintenance pro-
cedures for the air cleaner, fuel tanks and fuel lines, fuel filter, engine starting
aids, and accelerator, throttle and engine stop controls for which there are authorized
corrective maintenance tasks at the organizational maintenance level.
4-2. EQUIPMENT ITEMS NOT COVERED .
All equipment items for which corrective
maintenance is authorized at the organizational maintenance level are covered in this
chapter.
Section II.
AIR CLEANER
4-3. INTAKE AIR CLEANER REMOVAL, REPAIR, AND REPLACEMENT .
TOOLS :
9/16-inch open end wrench (2)
7/16-inch wrench (2)
Flat-tip screwdriver
SUPPLIES : None
PERSONNEL :
Two
EQUIPMENT CONDITION :
Truck parked, engine off, handbrake set.
Preliminary Procedure. Remove air cleaner filter element. Refer to
TM
9-2320-209-10.
4-1
Back to Top
