TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 73 of 830

TM 9-2320-209-20-3-1
c.
Repair. Repair clutch control and linkages by welding, straightening or
replacing any broken or damaged parts. Refer to TM 9-237.
d.
Replacement.
1.
Put pedal lever shaft (1) through brake lever assembly (2) and then through
shaft support ( 3) as shown.
2.
Put woodruff key (4) in slot at end of pedal lever shaft ( 1).
3.
Put control lever (5) on end of pedal lever shaft (1) . Pedal lever slot must
aline with key (4) on shaft. End of control lever should be flush with shaft.
4.
Using 9/16-inch wrenches,
tighten locknut (6) while holding bolt ( 7).
GO TO FRAME 2
TA 047258
3-7


Back to Top