TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 136 of 552

TM 9-2320-209-20-3- 2

1 .

Using a 7/16-inch wrench, unscrew bleeding screw (1) 3/4 turn. Look fo r

air bubbles in hydraulic fluid in container (2) .

2 .

When there are no air bubbles for five seconds, use 7/16-inch wrench t o

close bleeding screw (1) .

Make sure that bleeding screw (1) is screwed o n

tightly .

3 .

Take bleeding hose (3) off bleeding screw (1) and out of container (2) .

Dump hydraulic fluid in container (2) in the approved area .

4 .

Disconnect bleeding tank from master cylinder. Refer to para 13-15d .

END OF TAS K

13-12 3