TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 140 of 552
TM 9-2320-209-20-3- 2
13-16 .
BLEEDING SERVICE BRAKE SYSTEM WITHOUT USING BLEEDER TANK .
TOOLS :
3/4-inch open end wrenc h
7/16-inch box end wrenc h
Bleeding hos e
Transparent container, 2-quart capacit y
Flexible neck filler ca n
SUPPLIES :
Hydraulic brake fluid, type HB, VV-B-68 0
Clean clot h
PERSONNEL:
T
W
O
EQUIPMENT CONDITION :
Truck parked over maintenance bay, engine off ,
handbrake set .
a .
Filling Master Cylinder .
1 .
Open master cylinder access hatch (1) .
2 .
Using 3/4-inch wrench, unscrew and take off master cylinder filler cap (2) .
3 .
Using flexible neck filler can , fill master cylinder (3) to 1/2 inch from top .
Fill with hydraulic brake fluid .
4 .
Using 3/4-inch wrench , screw on master cylinder filler cap (2) .
5 .
Close master cylinder access hatch (1) .
END OF TAS K
13-12 7
Back to Top
