TM 9-2320-209-20-3- 2
FRAME 5
1 .
Working at rear of air reservoirs (1 and 2), put retaining strap (3) unde r
tube (4) and over air reservoirs as shown .
2 .
Aline three screw holes in retaining strap (3) with three scre w
support (5) .
Put
capscrew
(6)
and
two
capscrews
(7)
through
and rear support .
3 .
Using 9/16-inch socket and hinged handle, hold two capscrew s
9/16-inch wrench, screw on and tighten two locknuts (8) .
4 .
Using 9/16-inch socket and hinged handle, hold capscrew (6) .
inch wrench, screw on and tighten locknut (9) .
GO TO FRAME 6
holes in rea r
retaining stra p
(7) .
Usin g
Using 9/16 -
13-20 1