TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 396 of 552

TM 9-2320-209-20-3- 2

1 .

Using screwdriver , unscrew adjusting plug (1). Take out ball seat (2) .

2 .

Turn steering wheel to aline large end of slot on drag link end (3) with ball o n

pitman arm (4) .

3 .

Put slot in drag link end (3) onto ball of pitman arm (4). Put ball seat (2 )

into drag link end. Using screwdriver ,

screw in adjusting plug (1) until it i s

almost all the way in .

4 .

Lubricate drag link end (3). Refer to LO 9-2320-209-12/1 .

5 .

Using screwdriver bit , screw in adjusting plug (1). Unscrew adjusting plu g

one half turn or less until cotter pin (5) can be put in .

Using pliers, ben d

open ends of cotter pin .

END OF TAS K

15-1 1