TM 9-2320-209-20-3- 2
FRAME 5
1 .
2 .
3 .
Using screwdriver, screw in screw (1) until it is lightly snug. Hold scre w
with screwdriver and using 3/4-inch wrench, tighten nut (2) .
Go to cab of truck and turn steering wheel back and forth one turn aroun d
the midposition .
If there is a
do follow-o n
drag .
light drag at the midposition, the drag i s good .
If drag is good ,
maintenance action .
If drag is not good ,
NOT E
go to frame 6 to se t
Follow-on Maintenance Action Required :
Replace drag link on pitman arm. Refer to para 15-7 .
END OF TAS K
15-1 6