TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

  TM-9-2320-209-20-3-2 - Page 483 of 552

TM 9-2320-209-20-3-2
FRAME 5
1.
Put plate (1) under axle housing (2) with hole for shock absorber to back of
truck.
2.
Put two U-bolts (3) over saddle (4) and through holes in plate (1).
3.
Using 1 1/16-inch wrench,
screw on four nuts with lockwashers (5).
4.
Using 1 1/16-inch socket and 3/4-inch square drive torque wrench, tighten
nuts (5) to 170 to 180 pound-feet.
GO TO FRAME 6
17-10


Back to Top