TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 492 of 552

TM 9-2320-209-20-3-2

FRAME 5

1.

Using 1/4-inch center punch and hammer,

make a shallow hole in center of

rivet (1).

2.

Using drill press with 3/8-inch drill bit, drill out rivet (1).

3.

Using 3/8-inch driving pin punch and hammer, drive out rivet (1). Throw

away rivet and take off clip (2).

4.

Do steps 1 through 3 again for three clips (3, 4, and 5).

END OF TASK

17-19