TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 496 of 552

TM 9-2320-209-20-3-2

FRAME 3

1.

Put spacer (1) in clip (2) and aline screw holes. Put screw (3) through holes.

2.

Using 9/16-inch wrenches,

screw on and tighten nut (4) on screw (3). Do

not overtighten nut.

Clip (2) should not bind spring plates (5).

3.

Do steps 1 and 2 again for clips (6, 7, and 8).

GO TO FRAME 4

17-23