TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 105 of 548

TM 9-2320-209-20-3-3

18-22. GATE VALVE REMOVAL AND REPLACEMENT (TRUCKS M49A1C AND M49A2C).

WARNING

Smoking, sparks or open flame are not allowed

within 50 feet of fuel truck during this task.

Fuel may burn, causing explosion, injury to

personnel, and damage to equipment.

TOOLS: 3/4-inch wrench (2)

SUPPLIES:

Gate valve gaskets (2)

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

1.

Using wrenches, unscrew and take out four screws (1) and nuts (2) from

flange (3) on left side of gate valve (4).

2.

Do step 1 again for the four screws and nuts on flange (3) on right side of

gate valve (4).

3.

Take away gate valve (4) and two gaskets (5).

END OF TASK

18-9 0