TM 9-2320-209-20-3-3
b. Replacement.
FRAME 1
1.
Put cable (1) through nut (2). Put cable around thimble (3) and back through
nut again. Let about 1/2 inch of cable end come out of nut.
2.
Put two halves of split screw (4) together around both parts of cable (1) and
start nut (2).
3.
Push nut (2) with split screw (4) against thimble (3).
4.
Using adjustable wrench, hold split screw (4). Using 5/8-inch wrench,
screw on and tighten nut (2).
GO TO FRAME 2
18-97