TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 116 of 548

TM

9-2320-209-20-3-3

18-25. FRONT DISCHARGE VALVE CABLE REMOVAL AND REPLACEMENT (TRUCK

M49A1C).

TOOLS:

5/8-inch wrench

1/2-inch wrench

Pliers

Leather gloves

SUPPLIES: None

PERSONNEL: Two

EQUIPMENT CONDITION:

Smoking,

within 50

Fuel may

(2)

Truck parked, engine off, handbrake set, wheels

chocked.

WARNING

sparks or open flame are not allowed

feet of fuel truck during this task.

burn, causing explosion, injury to

personnel, and damage to equipment.

Always wear protective gloves when handling

cable.

Do not let cable slip through hands.

Rusty or broken wires can cause injury.

a.

Removal.

1.

Open truck rear compartment doors.

2.

Using 1/2-inch wrench, unscrew and take off nut (1). Take cable (2) out

of special bolt (3).

GO TO FRAME 2

18-101