TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 196 of 548

TM 9-2320-209-20-3-3

18-38. PUMP-TO-MANIFOLD HOSE REMOVAL AND REPLACEMENT (TRUCKS

M49A1C and M49A2C).

TOOLS: 3/4-inch wrench (2)

3/8-inch drive ratchet set

Flat-tip screwdriver

SUPPLIES:

Pump-to-manifold

Pump-to-manifold

Pump-to-manifold

Diesel fuel

PERSONNEL: One

hose

hose upper gasket

hose lower gasket

EUQIPMENT CONDITION:

Truck parked, engine off, handbrake set.

WARNING

Smoking, sparks or open flame are not allowed

within 50 feet of fuel truck during this task.

Fuel may burn,

personnel, and

a.

Removal.

causing explosion, injury to

damage to equipment.

FRAME 1

1.

Open fuel truck rear compartment doors.

2.

Using 3/4-inch wrenches,

unscrew and take off four nuts (1) and four

screws (2).

3.

Lift up lower pipe (3) and take off and throw away gasket (4).

GO TO FRAME 2

18-181