TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 275 of 548

TM

9-2320-209-20-3-3

b. Replacement.

FRAME 1

1.

2.

3.

4.

5.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame. Keep a fire extinguisher nearby

when solvent is used. Use only in well-ventilated

places.

Failure to do this may result in injury to

personnel and damage to equipment.

Using solvent, clean manhole cover (1) around where gasket (2) was. Use

scraper, if needed, to get rid of all of old gasket pieces.

Using solvent, clean around manhole where gasket (2) was. Use scraper, if

needed, to get rid of all old gasket pieces.

Do not let any gasket pieces

fall into tank.

Put new gasket (2) in place. Put manhole cover (1) down on gasket.

Hold clamp ring (3) open and put it on manhole cover (1). Make sure it

catches manhole cover and truck all around.

Put screw (4) through clamp ring (3) and using wrench, hold it. Put washer

(5) on screw. Using wrench, screw on and tighten nut (6).

END OF TASK

18-260