TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 278 of 548

TM

9-2320-209-20-3-3

18-53. DISCHARGE VALVE REMOVAL AND REPLACEMENT (TRUCKS M50A1, M50A2,

AND M50A3).

NOTE

This task is shown for the front discharge valve.

This task is the same for the front and rear dis-

charge valves.

TOOLS:

9/16-inch open-end wrench (2)

Cross-tip screwdriver (Phillips type)

Pliers

9/16-inch socket

10-inch extension

Universal joint

Ratchet

SUPPLIES:

Discharge valve gasket

Discharge valve-to-tank drain pipe gasket

PERSONNEL: T

W O

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Drain water from tank body. Refer

TM 9-2320-209-10.

to

18-263