TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 338 of 548

TM

9-2320-209-20-3-3

18-59. DELIVERY PUMP DRIVE SHAFT REMOVAL, REPAIR, AND REPLACEMENT.

TOOLS:

11/16-inch socket Brass punch

11/16-inch wrench (2) 5/16-inch wrench

1/8-inch sockethead screw key

3/16-inch sockethead screw key

(Allen wrench or equivalent) (Allen wrench or equivalent)

Pliers

9/16-inch wrench (2)

5/8-inch wrench

Ratchet

8-ounce ballpeen hammer

2-inch extension

Drift pin punch

SUPPLIES: None

PERSONNEL: T

W O

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

1.

Working under truck and using 3/16-inch allen wrench, loosen setscrew (1).

2.

Using hammer,

lightly tap drive shaft yoke (2) until shaft (3) is off.

3.

Go to other end of drive shaft (3).

GO TO FRAME 2

18-323