TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 340 of 548

TM

9-2320-209-20-3-3

FRAME 3

1.

Using 11/16-inch and 5/8-inch wrenches, unscrew and take off four nuts (1).

2.

Hold rear drive shaft (2) so it does not fall. Take out four screws (3).

3.

Using 1/8-inch allen wrench, loosen two screws (4).

4.

Wipe shaft (2) clean behind bearing unit (5) and slide bearing unit back on

shaft about 1 foot.

GO TO FRAME 4

18-325