TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 418 of 548
TM 9-2320-209-20-3-3
18-76.
DOOR SEALS REMOVAL AND REPLACEMENT (TRUCKS M109A2, M109A3,
M185A2 AND M185A3).
TOOLS:
Wire brush
Flat-tip screwdriver
SUPPLIES:
Adhesive, Fed. Spec MMM-A-139
Denatured alcohol, MIL-STD-1201
Stepladder, 10-foot
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Removal.
1.
Open doors (1) and hook in fully open position.
2.
Using screwdriver, pry out corner of seal (2) from channel (3) on door
opening (4).
3.
Pull out seal (2) around door openings (4) by hand.
GO TO FRAME 2
18-403
Back to Top
