TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 203 of 410

TM 9-2320-209-20-3-4

e.

Removal of Flexible Shaft Core.

FRAME 1

1.

Take off

2.

Take out

NOTE

Flexible shaft assembly does not have to be taken out of

truck to replace core. However, shaft assembly must be

taken off at tachometer end and engine end.

clip (1) from engine end of shaft core (2).

shaft core (2) from casing (3) by pulling on tachometer end (4) of

core, using pliers.

3.

If shaft core (2) is broken, use pliers on engine end (5) to pull out other piece.

END OF TASK

22-8