TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 211 of 410

TM 9-2320-209-20-3-4

22-4. SPEEDOMETER ASSEMBLY REMOVAL, REPAIR, AND REPLACEMENT.

TOOLS:

Flat-tip screwdriver 1-inch open end wrench

3/4-inch open end wrench 9/16-inch open end wrench

3/8-inch open end wrench 7/8-inch open end wrench

Slip joint pliers

SUPPLIES: Cotter pin

PERSONNEL: Two

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Disconnect battery ground cable. Refer to Part 1, para 7-58.

(2) Open hood and left side panel. Refer to TM 9-2320-209-10.

(3) Remove front tunnel. Refer to Part 3, para 18-5.

b.

Removal of Speedometer.

FRAME 1

1.

Using screwdriver, turn mounting studs (1) one quarter turn to the left.

2.

Pull instrument cluster (2) away from instrument panel (3).

GO TO FRAME 2

22-16