TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 218 of 410

TM 9-2320-209-20-3-4

f.

Repair of Flexible Shaft Assembly. The only repair that can be made to the

flexible shaft assembly is to replace core. Refer to para 22-4e and 22-4g of this

procedure.

g.

Replacement of Flexible Shaft Core.

NOTE

Before putting back flexible shaft core, check that

it has no dents, sharp bends or other damage. If

casing is damaged, do not put back core. Get a

new complete flexible shaft assembly.

FRAME 1

1.

Put keyed end (1) of core (2) into speedometer end (3) of casing (4) that

has the smaller coupling nut.

2.

Carefully push core (2) through casing (4) until keyed end (1) seats in trans-

fer end (5) of casing. Square end (6) should stick out of speedometer end

(3) of casing as shown.

3.

Put on retaining clip (7).

END OF TASK

22-23