TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 244 of 410

TM 9-2320-209-20-3-4

23-8. FUEL BURNING PERSONNEL HEATER CONTROL CABLES REPAIR AND

ADJUSTMENT.

TOOLS:

9/16-inch wrench

Flat-tip screwdriver

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, andbrake set.

a.

Removal.

FRAME 1

1.

Working from behind instrument panel and using screwdriver, loosen screw (1)

on adapter clamp (2). Take looped end of diverter adapter cable assembly (3)

off shaft (4) and take cable out of adapter clamp.

2.

Using screwdriver, loosen screw (5) on diverter clamp (6). Take looped end

of diverter cable (7) off shaft (8) and take cable out of diverter clamp.

GO TO FRAME 2

23-17