TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 235 of 410

TM 9-2320-209-20-3-4

c.

Replacement.

FRAME 1

Soldier A

Soldier B

Soldier A

1.

2.

3.

4.

5.

6.

Working from inside of cab, put heater diverter assembly (1) in

place and put through four screws (2). Using 7/16-inch wrench,

hold four screws and tell soldier B when ready.

Working from under hood and using 7/16-inch wrench, screw in and

tighten four washers (3) and nuts (4).

Put on three diverter ducts (5).

Using screwdriver, tighten three duct clamps (6).

Put cable (7) through diverter clamp (8). Put looped end of

control cable on shaft (9).

Using screwdriver, tighten screw (10).

NOTE

Follow-on Maintenance Action Required:

1. Adjust control cable. Refer to para 23-8.

2. Close hood and right side panel. Refer to

TM 9-2320-209-10.

END OF TASK

23-8