TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 232 of 410

TM 9-2320-209-20-3-4

c.

Repair. Repair

parts in their place.

d.

Replacement.

FRAME 1

is limited to throwing out damaged parts and getting new

1.

Working in engine compartment, put two duct clamps (1) on 3 1/2-inch heater

duct (2). Put heater duct in place and slide duct clamps to each end of duct

as shown.

Using screwdriver,

tighten two duct clamps.

2.

Working from inside of cab, put two duct clamps (3) on 19 1/2-inch diverter

duct (4). Put diverter duct in place and slide duct clamps to each end of duct

as shown.

3.

Using screwdriver, tighten two duct clamps (3).

GO TO FRAME 2

23-5