TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 228 of 410
TM 9-2320-209-20-3-4
CHAPTER 23
MAINTENANCE OF MATERIAL USED IN CONJUNCTION
WITH MAJOR ITEMS
Section I. SCOPE
23-1. EQUIPMENT ITEMS COVERED.
This chapter gives equipment maintenance pro-
cedures for winterization kits, deep water fording kit, and special purpose kits for
which there are authorized corrective maintenance tasks at the organizational mainte-
nance level.
23-2. EQUIPMENT ITEMS NOT COVERED.
All equipment items for which corrective
maintenance is authorized at the organizational maintenance level are covered in this
chapter.
Section II. WINTERIZATION KITS
23-3.
VEHICULAR COMPARTMENT HEATER REMOVAL AND REPLACEMENT.
TOOLS:
Flat-tip screwdriver
Open end wrench set, pn GGG-W-636
SUPPLIES:
None
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) Open hood.
Refer to TM 9-2320-209-10.
(2) Remove two heater hoses. Refer to para 23-18.
23-1
Back to Top
