TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 233 of 410

TM 9-2320-209-20-3-4

FRAME 2

1.

2.

3.

4.

Working from inside cab, put two duct clamps (1) on 29 1/2-inch diverter duct

(2). Put one end of diverter duct on left port of diverter assembly (3) and

put other end of left deflector (4). Slide duct clamps to each end of duct.

Using screwdriver, tighten two duct clamps (1).

Put two duct clamps (5) on 26 1/2-inch diverter duct (6). Put one end of

diverter duct on right port of diverter assembly (3) and put other end on

right deflector (7).

Slide duct clamp to each end of duct.

Using screwdriver, tighten two duct clamps (5).

Close

END OF TASK

NOTE

Follow-on Maintenance Action Required:

hood and left side panel. Refer to TM 9-2320-209-10.

23-6