TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 73 of 410
TM 9-2320-209-20-3-4
19-11.
REAR WINCH CABLE REMOVAL AND REPLACEMENT (TRUCK M764).
TOOLS:
Breaker bar
Extension
Screwdriver attachment
Wood block, 2 x 4 x 24 inches
SUPPLIES: None
PERSONNEL: Two
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a. Preliminary Procedure. Remove rear winch cable chain assembly. Refer to
para 19-10.
WARNING
Always wear heavy leather gloves when handling
cable.
Do not let cable run through hands. Broken
or rusty wire can cause serious injury to personnel.
b.
Removal.
FRAME 1
Soldier A 1. Working in cab, start engine. Refer to TM 9-2320-209-10. Pull
power divider lever (1) back to REAR WINCH REV position.
GO TO FRAME 2
19-60
Back to Top
