TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 75 of 410
TM 9-2320-209-20-3-4
c.
Replacement.
FRAME 1
1.
Put end
NOTE
Before putting cable on drum, check that cable winder
carriage has reached end of travel towards end of drum.
End point of travel is when carriage guide pin in center
of vertical slot in carriage is outside of cross chain sprocket.
of cable (1) through level winder (2) and put it in place on drum (3).
2.
Put clamp (4) on cable (1) and using breaker bar, extension, and screwdriver
attachment, screw in and tighten screw (5).
GO TO FRAME 2
19-62
Back to Top
