TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 96 of 410
TM 9-2320-209-20-3-4
19-16. CARRIAGE TRAVEL ADJUSTMENT (TRUCK M764).
TOOLS:
3/4-inch wrench
15/16-inch wrench (2)
3/4-inch socket
Breaker bar
5-inch extension
6-inch ruler
SUPPLIES:
None
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a. Preliminary Procedure.
Remove second reduction drive chain. Refer to
para 19-17.
b. Carriage Travel Adjustment.
FRAME 1
1.
Using 3/4-inch wrench, breaker bar, extension, and 3/4-inch socket, loosen
screw (1) and nut (2) on each cross chain bracket (3).
2.
Using 15/16-inch wrenches, loosen two adjusting screws (4).
GO TO FRAME 2
19-83
Back to Top
