TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 89 of 410
TM 9-2320-209-20-3-4
19-15.
CARRIAGE CROSS CHAIN REMOVAL AND REPLACEMENT (TRUCK M764).
TOOLS:
1/2-inch wrench
Breaker bar
3/4-inch socket
Socket extension
3/4-inch wrench
15/16-inch wrench (2)
Hammer
Flat-tip screwdriver
SUPPLIES: None
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedure. Remove secondary reduction drive chain. Refer to
para 19-17.
b. Removal.
FRAME 1
1.
2.
3.
GO
Using 1/2-inch wrench, unscrew and take out four screws, washers, and lock-
washers (1) from cross chain cover (2).
Take off cross chain cover (2).
Turn sprocket (3) until you find connecting link (4) in cross chain (5).
TO FRAME 2
19-76
Back to Top
