TM-9-2320-209-34-2-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3
MAY 1981
TM-9-2320-209-34-2-1 - Page 186 of 770
TM 9-2320-209-34-2-1
2-16. CAMSHAFT AND CRANKSHAFT GEARS REMOVAL AND REPLACEMENT.
TOOLS:
No special tools required
SUPPLIES: Timing gear cover gasket
Fuel pump drive gear access cover gasket
Oil pan gasket
Timing cover gasket
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) Remove radiator. Refer to TM 9-2320-209-20.
(2) Remove engine cooling fan. Refer to TM 9-2320-209-20.
(3) Remove tachometer drive adapter and cable. Refer to TM 9-2320-209-20.
(4) Remove air compressor drive belt. Refer to TM 9-2320-209-20.
(5) Remove fan drive belts. Refer to TM 9-2320-209-20.
(6) Remove vibration damper and pulley assembly. Refer to para 2-8.
(7) Drain oil from engine. Refer to LO 9-2320-209-12/1.
(8) Remove water pump. Refer to TM 9-2320-209-20.
2-157
Back to Top
