TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 202 of 770

frame 4

TM 9-2320-209-34-2-1

1.

Using feeler gage as shown, check backlash between the oil pump drive

gear (1) and the oil pump idler gear (2). Backlash should be between

0.006 and 0.014 inches.

2.

If backlash is not within limits given, mark oil pump driver gear (1) and

oil pump idler gear (2) for replacement.

GO TO FRAME 5

2-173