TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 338 of 770

TM 9-2320-209-34-2-1

c.

Replacement.

NOTE

If new harness is being put on, put old harness

next to new harness and put tags in the same

places as on old harness.

Refer to replacement procedures given for each

part in TM 9-2320-209-20, if needed, to work

on connectors and electrical leads covered in

this task.

1.

Put harness back on truck.

2.

Put two grommets (1) on firewall and aline screw holes. Put in two

capscrews (2), washers (3) , and nuts (4) .

3.

Replace all clamps. Refer to para 7-5.

GO TO FRAME 2

7-23