TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 351 of 770

TM 9-2320-209-34-2-1

7-11. VAN MAIN WIRING HARNESS REMOVAL AND REPLACEMENT.

TOOLS : No special tools required

SUPPLIES : Tags

PERSONNEL: One

EQUIPMENT CONDITION :

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Disconnect battery ground cable. Refer to TM 9-2320-209-20.

(2) Disconnect all van body external power sources. Refer to

TM 9-2320-209-10.

(3) Remove all 115-volt dome light fixtures. Refer to TM 9-2320-209-20.

(4) Remove ceiling panels and insulation. Refer to Part 2, para 17-41.

(5) Remove front access panel. Refer to Part 2, para 17-41.

b.

Removal.

FRAME 1

1.

Takeout four screws (l). Take off circuit breaker box cover (2).

2.

Take out two screws (3). Takeoff switch cover (4).

GO TO FRAME 2

7-36