TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 369 of 770

TM 9-2320-209-34-2-1

d. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 1-3.

e.

Inspection and Repair.

FRAME 1

1.

Check that three shifter forks (1) and three shifter shafts (2) have no

cracks, bends or other damage. Take out any chips, burrs or scratches

with honing stone. If any fork or shaft is cracked or bent, get a new one.

2.

Check that springs (3, 4, and 5) are not damaged in any way. If any spring

is damaged, get a new one.

GO TO FRAME 2

8-12