TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 374 of 770

TM 9-2320-209-34-2-1

FRAME 4

1.

Slide fourth and fifth speed shifter shaft (1) through hole in cover (2) as tagged.

Leave hole (3) uncovered. Take off tag.

2.

Slide fork (4) as tagged onto shaft (1) as shown. Take off tag.

3.

Put spring (5) and ball (6) into hole (3). Hold ball down and slide shaft (l) over ball

and into place.

4.

Aline setscrew hole in fork (4) with setscrew hole in shaft (l). Make sure tab on fork

sits in slot in plate (7). Put in setscrew (8).

5.

Tap in expansion plug (9).

6.

Do steps 1 through 5 again for second and third

GO TO FRAME 5

speed shifter shaft (10).

8-17