TM 9-2320-209-34-2-1
FRAME 2
1.
Put in 12 screws and lockwashers (l).
2.
Evenly tighten 12 screws and lockwashers (1) to 23 to 26 pound-feet.
3.
Take jack out from under truck.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
END OF TASK
NOTE
Follow-on Maintenance Action Required:
Replace transmission power takeoff rod (truck M342A2).
Refer to TM 9-2320-209-20.
Replace hydraulic hoist pump drive shaft (truck M342A2).
Refer to TM 9-2320-209-20.
Replace transmission power takeoff rod (trucks with
front winch). Refer to TM 9-2320-209-20.
Replace front winch drive shaft (trucks with front
winch). Refer to TM 9-2320-209-20.
Replace transmission-to-transfer propeller shaft.
Refer to TM 9-2320-209-20.
Replace transfer reverse shift lever rod. Refer to
TM 9-2320-209-20.
Replace clutch control rod. Refer to Clutch Linkage
Assembly, TM 9-2320-209-20.
Put in new front and intermediate cab tunnels. Refer
to TM 9-2320-209-20.
Put in new transmission gearshift lever. Refer to
TM 9-2320-209-20.
Fill transmission. Refer to LO 9-2320-209-12/1.
8-28