TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 590 of 770

TM 9-2320-209-34-2-1

(2) Cleaning, inspection, and repair.

FRAME 1

1.

2.

4.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

Clean compensator body (1) and cage cover (2) with dry cleaning solvent.

Check that all finished surfaces on compensator body (1) and cage cover (2)

have no scratches. If finished surfaces are scratched, rub out any scratches

with honing stone. If scratches will not rub out easily, get a new compensator

body (1) and cage cover ( 2).

NOTE

Do not take out tube fitting (3) or pipe plug (4).

Check that tube fitting (3) and pipe plug (4) are not damaged. If air tube

fitting or pipe plug is damaged, get a new compensator body (1) and cage

cover (2).

GO TO FRAME 2

12-29