TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 597 of 770

TM 9-2320-209-34-2-1

1.

Put a coat of clean hydraulic brake fluid on control valve piston (l), new outer

cup (2), and new inner cup (3).

NOTE

Outer cup (2) has smaller hole in center than inner cup (3).

2.

Push outer cup (2) over smaller stem of control valve piston (1). Flat face of

outer cup must seat against end of control valve piston.

3.

Push inner cup (3) over larger stem of control valve piston (1). Flat face of

inner cup must seat against end of control valve piston.

END OF TASK

12-36