TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 105 of 899

TM 9-2320-209-34-2-2

d.

Cleaning. There are no special cleaning procedures needed. Refer to cleaning

procedures given in Part 1, para 1-3.

e.

Inspection and Repair.

(1) Check that fender is not dented or bent. Straighten bends or dents.

Refer to FM 43-2.

(2) Check that fender is not cracked or torn and that it has no holes. Weld

cracks, tears and holes. Refer to TM 9-237.

(3) If fender needs more repair, get a new one.

f.

Assembly.

FRAME 1

1.

Put butt hinge (1) on fender (2) and aline screw holes.

2.

Put in two screws (3). Put on and tighten two nuts (4) with two washers (5).

END OF TASK

17-88