TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 134 of 899

TM 9-2320-209-34-2-2

17-11. VEHICULAR FLAT WINDSHIELD ASSEMBLY REPAIR.

TOOLS:

No special tools required

SUPPLIES:

Weatherstripping

Adhesive, MMM-A-1617

Soapy water

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Clean rags

Lint-free cloth

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine

a.

Preliminary Procedure. Remove windshield.

b. Disassembly.

off, handbrake set.

Refer to TM 9-2320-209-20.

FRAME 1

1.

2.

3.

GO

Take out two screws, washers, and capnuts (1) from crosspiece (2).

Take out four screws and washers (3) from frame (4).

Put wooden block under crosspiece (2) and tap lightly until crosspiece is

free from glass (5).

TO FRAME 2

17-117