TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 197 of 899

TM 9-2320-209-34-2-2

17-21. TANK BODY DOOR HOLDER REMOVAL, REPAIR, REPLACEMENT, AND

ADJUSTMENT.

TOOLS:

No special tools required

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Cotter pin (3)

Rags

PERSONNEL:

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

NOTE

This task is the same for the left and right door holders.

This task is shown for the right door holder.

1.

Open pump compartment door (1).

2.

Take out three screws and washers (2) and take off nuts (3) holding door

holder (4) to pump compartment door (1). Block open door.

3.

Take out two screws and washers (5) and take off nuts (6) holding door

holder (4) to truck frame (7). Take off door holder.

END OF TASK

17-180