TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 356 of 899
TM 9-2320-209-34-2-2
17-30. WATER TANK BODIES REMOVAL, REPAIR, AND REPLACEMENT (TRUCKS
M50A1, M50A2, AND M50A3).
TOOLS :
No special tools required
SUPPLIES : Gate valve gasket (4)
Clean rags
Manhold cover gasket (2)
Coating kit
PERSONNEL :
Two
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) Drain all water from holding compartments. Refer to TM 9-2320-209-10.
(2) Remove splash shields. Refer to para 17-69.
(3) Remove delivery pump and drive shaft with universal joint. Refer to
TM 9-2320-209-20.
(4) Remove exhuast bypass fording valve. Refer to Part 1, para 5-3.
(5) Take water discharge hose,
water dispenser nozzle, water suction
hose, Y coupling, and water suction strainer out of water tank body. Refer to
TM 9-2320-209-10.
(6) Remove pioneer tool rack. Refer to para 17-59.
17-339
Back to Top
