TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 387 of 899

TM 9-2320-209-34-2-2

17-32. WATER TANK NOZZLE ASSEMBLY REPAIR.

TOOLS:

No special tools required

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Packing

Cotter pin

Soap and water

PERSONNEL:

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedure.

Remove water nozzle.

Refer to hose and nozzle

assembiy removal and replacement, TM 9-2320-209-20.

b. Disassembly.

FRAME 1

1.

Take out

2.

Take out

3.

Take out

spout (1) from nozzle body (2).

cotter pin (3) and discharge lever pin (4).

NOTE

New equipment discharge lever (5) is riveted. Drill out

rivet and put in lever pin and cotter pin.

discharge lever (5).

4.

Take off plunger packing nut (6). Take out spring (7), packing retainer (8),

packing (9), and plunger (10). Throw away packing.

GO TO FRAME 2

17-370